Barracuda Banner Stands - including print

Barracuda Banner Stands (New Units Available 2012)

WE WILL NOT BE BEATEN ON PRICE FOR THIS PRODUCT

INCLUDES LAMINATED GRAPHIC

MASSIVE DISCOUNTS ON BULK ORDERS - PRICES TOO GOOD TO ADVERTISE - CALL 01827 51769 FOR DETAILS

Barracuda

WH321C

Stylish design and proven reliability makes Barracuda our most popular quality banner stand. Barracuda is the most feature-rich single-sided roller banner available and has been specially designed for maximum convenience and ease of use.

• 2130mm max high x 800 or 1000mm wide visible graphic area (add 300mm to allow for roller mechanism
• Available in anodised silver
• Charcoal grey end caps
• Internal graphic housing designed to accommodate graphic media up to 450 microns thick*
• Universal Grippa/Self adhesive top rail
• Secure slide in graphic system
• Ratchet tensioner
• Twist & Lock telescopic pole
• Supplied with quality foam padded carry bag

Print material specification:

Premium 150micron heavy weight Opaljet polyester blockout material, with tough scratch resistant 125 micron crystal over laminate to protect (total combined material thickness 275micron).  All printed at photo quality 2440dpi.  We never cut corners on the production of our graphics.

This print material is of the highest specification and includes a dimensionally stable Melinex® light–block polyester base to ensure that your pop up stand graphics look fantastic every time you use them.

Fire Certification Information

The HARMAN OPALJET range of media's are manufactured using Melinex ® polyester films, which is supplied from DuPont Teijin Films.

Please note that due to their physical and chemical properties, polyester film bases do not carry a Class 1 fire rating.

The physical and chemical property table shown below has been supplied by DuPont Teijin Films. It shows all the relevant fire regulation information in relation to their polyester films.

Please note that our customers will usually have laminated the final output from our range of products. As our customers use a wide range of laminates in their post-print applications, end-product consumers are advised to request their supplier, to contact the appropriate laminate manufacturer directly, for any additional fire certification information.

Physical and Chemical Properties

Form -Film

Colour - Grey

Odour - Odourless

Flash Point (°C) - 440 (ASTM 109129-68)

Density (g/ml) - 1.395 – 1.410 at 23 °C (plain films)

Solubility - Insoluble

Minimum ignition temperature (°C)  480 (ASTM 10929-68)

Decomposition Temperature (°C)  >260

Upper Melt Temperature (°C) 255 – 260 (ASTM E794-85)

Specific Heat (KJ/Kg)  1.34 at 25 °C

Thermal Conductivity (W/mK)  0.14

Heat of Combustion (MJ/Kg)  23.5

Limiting Oxygen Index (%02)  21 (ASTM D863)

Melinex® polyester film is a trademark of DuPont Teijin Films