Impact Pop Up Stands are our best value pop up displays. Having a fully magnetic framework and locking system this kit is exceptionally quick to erect. The impact pop up is only available in curved and in either 3x3 (2500mm wide) or 3x4 (3000mm wide)
3x3 Curved
Each panel is the same dimension 673mm x 2225mm - 3 front panels plus 2 ends, giving a total graphic size of 3365mm wide x 2225mm high.
Please supply your artwork to this complete dimension as a high resolution PDF with all images as CMYK and at least 100dpi when at full scale.
Please supply your case graphic wrap artwork at 1610mm x 790mm.
3x4 Curved
Each panel is the same dimension 673mm x 2225mm - 4 front panels plus 2 ends, giving a total graphic size of 4038mm wide x 2225mm high.
Please supply your artwork to this complete dimension as a high resolution PDF with all images as CMYK and at least 100dpi when at full scale.
Please supply your case graphic wrap artwork at 1610mm x 790mm.
Premium 300micron heavy weight Opaljet polyester blockout material, with tough scratch resistant crystal over laminate to protect. All printed at photo quality 2440dpi. We never cut corners on the production of our graphics.
This print material is of the highest specification and includes a dimensionally stable Melinex® light–block polyester base to ensure that your pop up stand graphics look fantastic every time you use them.
Fire Certification Information
The HARMAN OPALJET range of media's are manufactured using Melinex ® polyester films, which is supplied from DuPont Teijin Films.
Please note that due to their physical and chemical properties, polyester film bases do not carry a Class 1 fire rating.
The physical and chemical property table shown below has been supplied by DuPont Teijin Films. It shows all the relevant fire regulation information in relation to their polyester films.
Please note that our customers will usually have laminated the final output from our range of products. As our customers use a wide range of laminates in their post-print applications, end-product consumers are advised to request their supplier, to contact the appropriate laminate manufacturer directly, for any additional fire certification information.
Physical and Chemical Properties
Form -Film
Colour - Grey
Odour - Odourless
Flash Point (°C) - 440 (ASTM 109129-68)
Density (g/ml) - 1.395 – 1.410 at 23 °C (plain films)
Solubility - Insoluble
Minimum ignition temperature (°C) 480 (ASTM 10929-68)
Decomposition Temperature (°C) >260
Upper Melt Temperature (°C) 255 – 260 (ASTM E794-85)
Specific Heat (KJ/Kg) 1.34 at 25 °C
Thermal Conductivity (W/mK) 0.14
Heat of Combustion (MJ/Kg) 23.5
Limiting Oxygen Index (%02) 21 (ASTM D863)
Melinex® polyester film is a trademark of DuPont Teijin Films
